Sunday, February 17, 2013

Valentines Day 2013

Valentines Day is a big deal at our house. Almost as big as Halloween or Christmas. We all make handmade Valentines and this year was no exception. Rather than craft mine out of paper, pens, glue, thread, etc. this year I decided to make little boxes for Sarah, Helen, and Liz.

They were kind of fun to do but took longer than I thought they would! The only supplies I had to buy were some super glue and a half pint of bright red glossy paint. I already had all the wood. I glued up all three boxes at the same in one long segmented box. Then I cut them apart and sanded them down.

The lids proved to be tricky because I tried to make them fit too tightly so I ended up having to trim them with a saw and chisel after I got them painted because they were too tight. I think they came out well and they were a hit with all the ladies!

Tuesday, January 1, 2013

Handmade Christmas 2012

This year's handmade gifts were, once again, a big hit with all of us. I wasn't as stressed this year about mine, which was nice, so I enjoyed myself quite a bit while making them.
This is a small shelf I built for Sarah to go in our downstairs bathroom. It's quite simple but it does the trick. Made from pine with simple dado and miter joints, it was pretty straight forward to build but looks good (if I do say so myself).
Both girls have fallen in love with the BBC series, "Dr. Who", but especially Elizabeth so I made her this Christmas decoration of the Dr.'s ship the Tardis. I used the wood from a clementine crate for my materials so I didn't really have to do much milling or anything. I used thick super-glue on it, so once everything was cut out, gluing it together was very quick.
Lastly is this earring hanger for Helen. She's been making jewelry like crazy for a couple years now so this is a really useful gift for her. It's about 12"x14" with plain old construction mesh stapled to the back. As you can see, she's already started to use it!

Sunday, May 13, 2012

Long time coming

I spent a couple hours yesterday finally trimming the foundation insulation down a bit below grade on the side of the house. It wasn't that hard, really. I sliced down into the foundation about 45 degrees and peeled back the sod. That gave me access to the blue-board, which I was able to pry/break off in large chunks (without a ton of foam splinters flying everywhere). Then I just flipped the sod back into place. This is what it used to look like (I don't have a more recent shot). This photo was taken in the spring of 2007 when I was going around the house fixing random clapboards that our by-then-fired general contractor had neglected to put up. Helen helped quite a bit, too.
Here's a shot showing her helping rather than getting fixated on the mud! She was only 10, after all.

Sunday, April 29, 2012

More Boat Storage Racks

It's spring time on Advent Hill road which means we start thinking about messing about in boats. I built some boat storage racks on the barn for winter boat storage a while ago. Well, in order to be really convenient, the barn is just a bit too far away so I decided to put another set of racks on the woodshed.

Using some old 2x4s from the barn construction project, I built these in a few minutes so that they could hang on the side of the woodshed. Not wanting to completely block the back of the woodshed, I hung the racks up with 5/16 bolts, washers, and wing-nuts so that they could be removed easily. I rarely need to get at that side of the woodshed, but I figured it was just as easy to use removable hardware as permanent so I went with the removable. The racks are 88" long; each bracket arm is 30" long and the two brackets are about 32" apart. This allows me to have the kayaks up on edge and put two of them on the bottom.

Tuesday, December 27, 2011

Christmas Gifts 2011



My Christmas crafting for 2011 went pretty smoothly. Usually, I'm feeling very under the gun leading up to Christmas Eve but this year I figured out what I wanted to make early and actually got the gifts done at least a week in advance. I wish I could do that every year!
For the girls, I made each of them a pair of fingerless gloves, or gauntlets, out of recycled sweaters and fleece. You can see the Instructables article here. They required a bit of machine sewing and some hand sewing to complete. Here's a tip: when you go to the fabric store around Christmas to buy material, get a number for the cutting table line as soon as you walk in the store. Otherwise, you'll have to wait a VERY long time to get your material cut.

Sarah has always wanted a way to dry washed plastic ziploc bags, so that's what I made her this year. Drilling angled holes with the correct orientation and at the same level around a curved dowel proved to be quite difficult. I eventually settled on this jig. (Some might call it a jury-rig, but it worked.)


I bought the dowel arms pre-cut and I only used part of a 1" dowel for the trunk. However, I needed the rest of the 1" dowel to make sure my jig would work. The base was pre-cut, too, from the craft section at our local Joanne's. I finished it with some urethane I had lying around.

As usual, I really enjoyed the planning and making of these gifts. We exchange our handmade gifts on Christmas eve so that we can really focus on just these gifts. It's always a very special event that we all really enjoy. I'm already thinking about gifts for next year.
Merry Christmas!

Sunday, November 20, 2011

Santa's Workshop is Open for 2012!


I've written a few previous posts about my family's tradition of creating handmade gifts for Christmas each year. Many times, the handmade gifts are the favorites of all gifts, including the store-bought ones.


This year, Sarah and I decided to donate a wooden music stand from MusicMakers to my daughter's 7th grade class as a raffle prize. I made one of these several years ago for my daughters so I was familiar with it as I started this one. Overall, the kit itself and the instructions are excellent. I broke the project up into two sessions so that I could do the bulk of the gluing on day one and then pretty much just assemble and sand on day two. This worked out great.


I've been working on a couple other things that I can't share just yet because I don't want to spoil anybody's surprise. I'll check in again after Christmas!

Sunday, July 24, 2011

Octagonal Side Tables


I've been wanting to build these tables for a long time. I got the idea from a side table we bought at a yardsale for a couple bucks. We like them so much that I decided to make a few.
I started out with some 1x6s and a 1x12 from Home Depot. Liz and I cut the 1x12 into 11" squares on the table saw. Then we drew the octagon shapes onto one. Once I realized that the angles were all 45s, I figured out how to make a template for the table saw; that meant I didn't have to measure up and draw 6 octagons. Definitely a time saver.
Next we cut the legs down from the 1x6. I'm not sure of the width b/c I just cut them all to the same width on the table saw but they're 22" long.
The next thing we built was a plywood box (from scrap) with a couple stops on it so that we could set the bottom shelf at the right height and have a stable surface to hold things in place while we nailed the legs on. Two 15" lengths of scrap legs let us set the table tops at the right height.
A bit more sanding and a coat of stain and we are good to go.
I didn't keep the receipt from the Home Depot when I bought the materials but I'm pretty sure they cost less than $10 each.
I forgot to mention one of the prime motivations for doing this: it's hot as blazes here and working in the basement for a couple hours was nice and cool!